Home > VMC-855HL >

New‑model VMC‑855 Vertical Machining Centre

Product Categories

Aluminium Profile Machining Center [16]
GLM-1814HL [1]
TAP-640 [8]
Vertical Machining Centers [2]
VF-600 [14]
Drilling And Tapping Center [1]
GLM-2016HL [5]
Steel Profile Machining Center [10]
VMC-855HL [11]
GLM-2516HL [3]
Profile Machining Center [11]
VMC-1055HL [6]
Gantry Machining Centers [9]
GLM-3016HL [1]
VMC-1160HL [12]
GLM-3022HL [2]
VMC-1165HL [17]
GLM-4025HL [6]
VMC-1275HL [8]
GLM-5026HL [1]
VMC-1375HL [8]
GLM-2516HD [1]
VMC-1575HL [9]
GLM-3025HD [1]
VMC-1480HL [1]
VMC-1680HL [2]
VMC-1890HL [6]
VMC-866HD [1]
Moving Column Gantry Machine Centers [2]
VMC-1066HD [5]
Bridge Type Machining Center [1]
VMC-1370HD [1]
TAP-740 [13]
TAP-1100 [3]
MHE-50 [5]
MHE-63 [1]
MH-630 [1]
MH-800 [2]
MH-1000 [1]

Guchi Intelligent Equipment (Jiangsu) Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

New‑model VMC‑855 Vertical Machining Centre

Contact Now

Item		Unit	VMC-855HL
System	CNC System	-	FANUC
	Rapid Speed	mm/min	36000/36000/36000
	Cutting Feed Speed	mm/min	1-10000
	3-Axis Rated Power	Kw	3.0/3.0/3.0 [Note①]
	3-Axis Rated Torque	N.m	20.0/20.0/20.0 [Note①]
Worktable	T-Slot Dimensions	-	5-18-90
	Worktable Dimensions	mm	1000*550
	Max Worktable Load	Kg	600
Travel	3-Axis Travel	mm	800550550
Travel	Distance from Spindle Nose to Worktable	mm	120-670
Spindle	Spindle Power	Kw	7.5-11
	Max Spindle Speed	rpm	10000(Belt)/12000(Direct Drive)/15000(Direct Drive)
	Spindle Taper	-	BT40 [Note②]
Transmission	Screw Diameter/Pitch	mm	Φ40D16/Φ40D16/Φ40D12
	Linear Rail Brand/Type/Width	-	PMI Roller 35mm/Roller 45mm/Roller 45mm [Note③]
	Number of Rails/Sliders	Pcs	2-4/2-4/2-6
Tool Magazine	Tool Magazine Capacity	Pcs	24 [Note④]
	BT/BBT Pull Stud Angle	°	45°
	Max Tool Diameter	mm	Φ80(Full Magazine)/Φ150(Empty Adjacent Tool)
	Max Tool Length/Weight	mm/kg	300/8
	Tool Change Time	s	1.3
Partial Configuration	Automatic Chip Removal	-	Rear Flushing
	Automatic Lubrication System	-	Thin Oil Lubrication
	Electrical Cabinet Cooling	-	Heat Exchanger
Accuracy	Positioning Accuracy (Full Travel)	mm	0.008
Accuracy	Repeat Positioning Accuracy (Full Travel)	mm	0.005
Others	Air Supply Flow/Pressure	-	Flow 150(L/min)/Pressure 6Bar
	Total Power	Kw	20
	Machine Weight	Kg	5500
	Machine Overall Dimensions (LWH)	mm	260023502800 [Note⑤]

Standard Configuration:

Umbrella-shaped servo tool magazine, rear-flush chip removal, spindle oil cooler, water gun, air gun, spindle air curtain, spindle ring spray, centralized lubrication, air source treatment, oil-water separation, heat exchanger

Optional Configuration:

Mitsubishi/Syntec system, hollow screw, chain-type chip removal, grease lubrication, electrical cabinet air conditioner, 4-axis, 5-axis, column heightening, tool internal cooling, fixtures, clamps

※ The product’s appearance and configuration will be updated with technological development (but will not be lower than current technical requirements). No separate notification will be given; specific details shall be subject to the technical agreement at the time of purchase.

Note ①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.

Note ②: Optional BT50-155 spindle;

Note ③: In case of stock shortage, equivalent specifications (e.g., HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given;

Note ④: Optional 30-tool capacity for the tool magazine;

Note ⑤:This dimension does not include the water tank (the width of the rear-flush water tank increases by 550mm) or the chain (the length of the chain increases by 1000mm). Select one option based on the actual configuration.

New‑model VMC‑855 Vertical Machining Centre Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Guchi Intelligent Equipment (Jiangsu) Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!